Smok Pen – How to Change the Coil and Change the Flavour
The Smok Pen is fairly the interesting new electronic writing device. It is a pen that you can use to write on paper and draw on with a pen or your finger. But it does so much more. It is possible to control its temperature, and you are able to use it to spray an elixir of e-liquid. This short article will show you how exactly to change your Smok Pen into an incredible vaporizer.
The body of the Smok Pen is made out of a durable stainless. That is what makes it so nice and sturdy. However, the body of the vaporizer is covered in a fabric material that is not heat sensitive. So it is perfect for anyone that might be allergic to heat. In addition, it works great if you work with it on a cold day. If you work with it outside for extended periods of time, then you should consider getting a model which has a built-in compressor.
The most notable of the Smok Pen is constructed out of black silicone material. When you place the pen onto its heating element, it gets hotter the outer skin of the silicone which causes it to expand. When it does that, a small reservoir is made inside the pen’s body. When you place your individual Vaporizer Pen onto the reservoir, it is possible to start vaporizing your e-liquid.
If you want to turn your Smok Pen into a vaporizer, then you need to remove the metallic plate covering the coil. On some models of Smok Pens, the plate covering the coil is located between the tank and your body. Other models could have the plate located on the bottom. If you have an authentic Smok Pen, then removing the plate will not be easy at all. Lots of people have reported they have difficulty removing the plates, and sometimes, they even find yourself damaging their pen.
If you have a genuine Smok Pen, you then should go ahead and take off the metal plate within the coil. This is because the coil will be linked to a little metal sub-ohm tank. If you don’t remove the plate, then your e-liquids that are stored within it will begin to heat up. At these times, the e-liquids risk turning into vapor instead of turning out to be liquid, and you risk getting burned.
Once you have removed the metallic cover, then you can access the two screws that are holding down the body of your Smok Pen. Carefully remove the screws, and then carefully remove the metal sub-ohm tank from the pen. It’s important that you place your hands under the Smok Pen, since it is incredibly hot. Many papers have reported that they burned their hand when they were trying to unscrew the tank. Once you have placed your hands under the pen, then start the battery and put it in the “fire” mode. It’s important that you do not turn on the pen while the battery is in the “fire” mode, as the battery may start to obtain hot.
After that, carefully pull the pen’s head off of the coil. You will then need to take away the entire coil from underneath of the pen, that will create a tight space where one can replace the coil. Carefully insert the new coil into the space. Ensure that you follow all of the instructions, and that you align the new coil in the same manner because the old one was aligned. You’ll then start the pen and apply the airflow control switch to create the airflow. If you follow these instructions carefully, you then will not have a problem together with your new airflow device.
If you have finished replacing the coil, you will have to reconnect the battery to the electrical circuit board. Your smok vaporizer will now prepare yourself again to use, and when you love it, you will definitely benefit from the new airflow, and the wonderful flavours that it brings. Juul Pods If you feel that you want to purchase your own flavours, you should learn which flavours can be found in the Smok Pen selection of e-liquids.